It is extremely important that DRI WASH 'n GUARD® be applied with the AIRosol sprayer only. Use on hard, nonporous surfaces only. Pretest on inconspicuous area before use. Can be used over surface containing moderate level of dust, dirt, road grime or salt.

1. Apply Dri Wash 'n Guard® to a cool, dry surface in a shaded area. Avoid windy conditions if possible.

2. Use two soft, clean micro fiber cloths 1st for cleaning and polishing and the 2nd for buffing.

3. Invert the bottle and shake vigorously for 15-20 seconds before pouring into your AIRosol pump sprayer.

4. Pressurize the AIRosol pump sprayer by pumping the cap up and down until a strong resistance is felt (approx. 10-15 times).

5. Spray Dri Wash 'n Guard® on a small section of vehicle (2-3 sq. ft. area), spraying with a broad sweeping motion where possible so not to run. On windows, apply a light coat.

6. With moderately firm pressure, rub DWG with micro fiber cloths thoroughly over the sprayed area until the filmy haze that appears almost disappears.

7. Buff the remaining haze to a high gloss with 2nd micro fiber cloth.

That all it takes to keep your car clean, protected and looking new longer. So, why would you want to work any harder than this to keep your car clean? With our DRI WASH 'n GUARD® you now have more time for other things in your life to due and keep your auto looking great in less time.
NOTE: If your vehicle(s) has signage, decals or vinyl stickers placed on them, then, you will find the UV in our DRI WASH 'n GUARD® ULTRA-ION™ will help protect your signage from the sun UV rays and keep it looking great longer.

DWG International ("The Original Waterless Car wash") Dri Wash 'n Guard ® products have cleaned over 80 million vehicles and saved 10 billion gallons of water . Check out how you can save with our products.